Valve-expert

Raising the Standard

Top-notch pumps and valves. Delivered just-in-time.

Whatever your application, whatever your requirements: we have the perfect solution right at hand. Discover top-notch pumps and valves in an impressive variety of versions and look forward to just-in-time delivery.

Top-notch pumps and valves. Delivered just-in-time.

Whatever your application, whatever your requirements: we have the perfect solution right at hand. Discover top-notch pumps and valves in an impressive variety of versions and look forward to just-in-time delivery.

The perfect solution right at hand

From water supply to industrial production, from the energy sector to building service engineering - we have been developing customised solutions for a wide range of applications for decades. Drawing from the success of numerous projects, we have derived a rich portfolio of standard configurations known for their proven quality: reliable, efficient and easy-to-maintain.

The best part: all standard products can be conveniently ordered through your local KSB contact. No additional configuration required, no fuss.

Why choose KSB standard products?

  • No costly development
    We don't need to start from scratch; your perfect solution is already available.
  • Proven quality
    Our standard pumps and valves have proven themselves in successful projects around the globe.
  • Just-in-time delivery
    Whatever you need, we deliver standard pumps and valves in any quantity exactly when you need them.
  • Total cost of ownership
    With KSB SupremeServ, we will accompany you throughout the entire life cycle of your standard product, thus maximising its service life.

Typical applications for KSB standard products

  • Waste Water Treatment, Disposal and Transport
  • Water Treatment, Supply and Transport
  • Industrial Production
  • Heating and Cooling Supply
  • Drainage
  • and many more

Standard pumps: highlights from our portfolio

Eta family and beyond: we have been defining the gold standard for standard pumps for decades. From power stations to sewage plants, deep down in the mines or on the high seas, our pumps have been (and continue to be) used millions of times in many applications around the globe.

Movitec

Movitec

Multistage vertical high-pressure centrifugal pump in ring-section design with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design), close-coupled. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.

Etanorm SYT

Etanorm SYT

Horizontal volute casing pump in back pull-out design, single-stage, with ratings and dimensions to EN 733, radially split volute casing with integrally cast pump feet, replaceable casing wear rings, closed radial impeller with multiply curved vanes, single mechanical seal to EN 12756, double mechanical seal to EN 12756, drive-end bearings: rolling element bearings, pump-end bearings: plain bearings, with magnetless KSB SuPremE motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 and PumpDrive variable speed system; ATEX-compliant version available.

Amarex KRT

Amarex KRT

Horizontal or vertical single-stage submersible motor pump in close-coupled design, with various next-generation impeller types, for wet or dry installation, stationary or transportable version, with energy-saving motor and models for use in potentially explosive atmospheres.

 

Standard valves: highlights from our portfolio

BOA and beyond: we have been pushing innovation in the valve sector for more than 150 years, thus constantly raising the market standards. From dewatering to energy storage, industrial cooling to oil and gas processing, KSB valves are available as standard products for all imaginable applications.

BOAX-B

BOAX-B

Centred-disc butterfly valve with ISO 5211 compliant square shaft end, sealed by elastomer liner (EPDM XC / XU or nitrile K), with lever, manual gearbox, pneumatic or electric actuator; semi-lug body (T2), full-lug body (T4). Body types T2 and T4 are suitable for downstream dismantling and dead-end service. Valve disc made of nodular cast iron or stainless steel. Connections to EN.

ECOLINE GTC 150-600

ECOLINE GTC 150-600

Gate valve to ANSI/ASME with flanged ends, cast steel A216 WCB, Trim 8 (Stellite/13 % chrome steel) for Class 150/300/600, Trim 5 (Stellite/Stellite) for Class 600, with bolted bonnet, outside screw and yoke, non-rotating stem, flexible wedge, graphite gland packing, stainless steel/graphite gaskets.

NORI 40 ZXL/ZXS

NORI 40 ZXL/ZXS

Globe valve to DIN/EN with flanged ends (ZXL), butt weld ends or socket weld ends (ZXS), with gland packing, with on/off disc or throttling plug, rotating stem, seat/disc interface made of wear and corrosion resistant chrome steel or chrome nickel steel.

Illustration of the phases of a product life cycle: Consultation and analysis, commissioning, operation and repair

Maximising service life, minimising total cost of ownership

Each of our standard products come with a comprehensive package of services. With KSB SupremeServ, we accompany you throughout the entire life cycle of your standard product. With more than 3,500 specialists worldwide, we support from initial advice and analysis to planning, installation, operation and maintenance. Thus maximising the service life of your product and minimising your total cost of ownership.