Dry-installed pump MegaCPK

Horizontal radially split volute casing pump in back pull-out design, with radial impeller, single-entry, single-stage, to DIN EN ISO 5199, dimensions to DIN EN ISO 2858, complemented by nominal diameters DN25 and ≥DN200, in large range of material and seal variants; also available as a variant with "wet" shaft and conical seal chamber. ATEX-compliant version available.

Lihat semua dokumen dan unduhan

Aplikasi utama

Chemical industry (aggressive / other liquids)
Petrochemical industry (aggressive / other liquids)
Process engineering
Refinery

Data teknis

Maximum flow rate TSG: 3300 m3/h
Maximum head TSG: 162 m
Max allow ds work.pressure TSG: 25 bar
Max allowed fluid temp TSG: 400 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact

ksbsales@ksb.com

Manfaat

Hydraulic characteristics optimised for excellent efficiency and NPSH, ensuring energy-efficient and environmentally friendly use of resources
Lower investment costs as duty points required can be achieved with smaller pump sizes
Lower operating costs due to reduced energy consumption, optimised spare parts concept and hard-wearing, service-friendly design

Data teknis

Component function: Pump
Connection type Inlet: Flange
Drive concept: With electric actuator
Maximum flow rate TSG: 3300 m3/h
Minimum flow rate TSG: 2 m3/h
Maximum head TSG: 162 m
Minimum head TSG: 2 m
Mains frequency: 50 Hz,
60 Hz
Mtrl Hydraulic casing: EN-GJL-250/A48 CL 35B,
GP240GH+N/A216 GR WCB,
G17CRMOV5-10,
GX5CRNIMO19-11-2/A743 GR CF-8M,
GX3CRNIMOCUN24-6-2-3/GX2CRNIMOCUN25-6-3-3/A9951B
Nominal pressure Outlet: PN 25
Max allow ds work.pressure TSG: 25 bar
Suction behaviour: Non-self-priming
Max allowed fluid temp TSG: 400 °C
Min allowed fluid temp TSG: -40 °C

Gambar penampang

Unduh