Butterfly valve KE

Centred-disc butterfly valve with ISO 5211 compliant square shaft end and PFA liner. With lever, manual gearbox, pneumatic or electric actuator. With wafer-type body (T1), full-lug body (T4) or U-section body with raised faces (T6). EN, ASME, JIS connections possible.

Lihat semua dokumen dan unduhan

Aplikasi utama

Chemical industry
Seawater desalination/reverse osmosis
Paper industry / pulp industry
Pharmaceutical industry

Data teknis

Nominal pressure Hydr casing: PN 6, PN 10
Maximum nominal size TSG: DN 600
Max allowed fluid temp TSG: 200 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact

ksbsales@ksb.com

Manfaat

Primary seal at the shaft passages:
- Ensured by the contact pressure between the valve disc with spherical sealing contour and the elastomer or PFA liner
- The compression of the liner’s collar between the shaft and the body ensures absolutely tight sealing.

Data teknis

Component function: Shut off/control flow
Connection type Inlet: Installation between flanges
Design concept Drive: With electric actuator,
With handwheel,
Hydraulic,
Lever,
With pneumatic actuator
Mains frequency: 50 Hz
Mtrl Hydraulic casing: EN-GJS-400-18U-LT,
JL-JS1030
Nominal pressure Hydr casing: PN 6,
PN 10
Maximum nominal size TSG: DN 600
Minimum nominal size TSG: DN 40
Max allowed fluid temp TSG: 200 °C
Min allowed fluid temp TSG: -20 °C
Valve body type: Wafer-type body,
Full-lug type, raised faces,
U-shaped body, raised faces