Vertical shaft submersible pump INVCP

Vertical immersion pump for wet or dry installation, available with closed or semi-open impeller. Supplied with discharge pipe extending above the baseplate (INVCP) or without discharge pipe (INVCN). ATEX-compliant version available.

Lihat semua dokumen dan unduhan

Data teknis

Maximum flow rate TSG: 1600 m3/h
Maximum head TSG: 100 m
Max allow ds work.pressure TSG: 10 bar
Max allowed fluid temp TSG: 100 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact

ksbsales@ksb.com

Manfaat

Oversized bearings make for long-term reliability.
Different pump designs and materials for a wide range of applications, e. g. bearing lubricated with fluid supplied from the outside
Clogging is prevented; suction problems are prevented caused by hindered flow through strainers

Data teknis

Component function: Pump
Connection type Inlet: Flange
Drive concept: With electric actuator
Maximum flow rate TSG: 1600 m3/h
Minimum flow rate TSG: 0.6 m3/h
Maximum head TSG: 100 m
Minimum head TSG: 2.2 m
Mains frequency: 50 Hz,
60 Hz
Mains voltage: 230 V,
400 V,
460 V
Mtrl Hydraulic casing: A351 GR CF8M,
EN-GJL-250/A48 CL 35B
Nominal pressure Outlet: PN 10
Max allow ds work.pressure TSG: 10 bar
Suction behaviour: Non-self-priming
Max allowed fluid temp TSG: 100 °C
Min allowed fluid temp TSG: -10 °C