Dry-installed pump Etanorm-RSY

Horizontal volute casing pump in back pull-out design, single-stage, with ratings and dimensions to EN 733, radially split volute casing with integrally cast pump feet, replaceable casing wear rings, closed radial impeller with multiply curved vanes, single mechanical seal to EN 12756, double mechanical seal to EN 12756, drive-end bearings: rolling element bearings, pump-end bearings: plain bearings, with magnetless KSB SuPremE motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 and PumpDrive variable speed system; ATEX-compliant version available.

Lihat semua dokumen dan unduhan

Aplikasi utama

Heat transfer systems
Hot water circulation
Chemical industry
Petrochemical industry

Data teknis

Maximum flow rate TSG: 2285 m3/h
Maximum head TSG: 101 m
Max allow ds work.pressure TSG: 16 bar
Max allowed fluid temp TSG: 350 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact

ksbsales@ksb.com

Manfaat

Operating costs reduced by trimming the nominal impeller diameter to match the specified duty point
Easy to dismantle due to back pull-out design; no need to remove the pump casing from the piping
High resistance by anti-seize product-lubricated carbon plain bearing or SIC/SIC bearing

Data teknis

Component function: Pump
Connection type Inlet: Flange
Drive concept: With electric actuator
Maximum flow rate TSG: 2285 m3/h
Minimum flow rate TSG: 50 m3/h
Maximum head TSG: 101 m
Minimum head TSG: 12 m
Mains frequency: 50 Hz,
60 Hz
Mains voltage: 400 V,
460 V
Mtrl Hydraulic casing: EN-GJS-400-15/A536 GR 60-40-18
Nominal pressure Outlet: PN 16
Max allow ds work.pressure TSG: 16 bar
Suction behaviour: Non-self-priming
Max allowed fluid temp TSG: 350 °C
Min allowed fluid temp TSG: -30 °C