Dry-installed pump Etabloc SYT

Volute casing pump for horizontal or vertical installation, back pull-out design, single-stage, with ratings to EN 733, radially split volute casing, replaceable casing wear rings, volute casing with integrally cast pump feet, closed radial impeller with multiply curved vanes, single mechanical seal to EN 12756, product-lubricated carbon plain bearing, grease-lubricated radial ball bearing in the motor housing, with magnetless KSB SuPremE motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 and PumpDrive variable speed system; ATEX-compliant version available.

Lihat semua dokumen dan unduhan

Aplikasi utama

Heat transfer systems
Hot water circulation

Data teknis

Maximum flow rate TSG: 337 m3/h
Maximum head TSG: 99 m
Max allow ds work.pressure TSG: 16 bar
Max allowed fluid temp TSG: 350 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact

ksbsales@ksb.com

Manfaat

Designed to deliver reliable operation with mineral and synthetic thermal oils up to 350 °C
Maximum operating reliability ensured by KSB mechanical seal with multi-spring arrangement and reliable venting during pump operation
Safety barriers: Special contour ensures reliable removal of leakage at the mechanical seal; confined sealing elements and effective heat barrier

Data teknis

Component function: Pump
Connection type Inlet: Flange
Drive concept: With electric actuator
Maximum flow rate TSG: 337 m3/h
Minimum flow rate TSG: 1 m3/h
Maximum head TSG: 99 m
Minimum head TSG: 1 m
Mains frequency: 50 Hz,
60 Hz
Mains voltage: 400 V,
460 V
Nominal pressure Outlet: PN 16
Max allow ds work.pressure TSG: 16 bar
Suction behaviour: Non-self-priming
Max allowed fluid temp TSG: 350 °C
Min allowed fluid temp TSG: -30 °C

Gambar penampang

Unduh