Main Applications
- Pumping station
- Domestic waste water
- Waste water transport
- Draining of pits, shafts, etc.
Technical Data
- Max. flow rate
- 130 m3/h
- Max. head
- 37 m
- Max. allowed working pressure
- 16 bar
- Maximum allowable fluid temperature
- 40 °C
Material number list – AmaPorter
39 productsMaterial number | Price | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AmaPorter F 500 ND | KSB AmaPorter [A] | 500 | 400V | Three-phase current | 50Hz | 0.55kW | No | 10m | Free flow impeller | Without | 24 kg | 39017191 | Loading... | |
| AmaPorter F 500 ND | KSB AmaPorter [A] | 500 | 380V | Three-phase current | 60Hz | 1.1kW | No | 10m | Free flow impeller | Without | 23 kg | 39017143 | Loading... | |
| AmaPorter F 500 ND - 20m | KSB AmaPorter [A] | 500 | 400V | Three-phase current | 50Hz | 0.55kW | No | 20m | Free flow impeller | Without | 23.4 kg | 39018538 | Loading... | |
| AmaPorter F 500 NE | KSB AmaPorter [A] | 500 | 230V | Single-phase AC | 50Hz | 0.55kW | No | 10m | Free flow impeller | Shockproof plug type E | 24 kg | 39017195 | Loading... | |
| AmaPorter F 500 NE - 20m | KSB AmaPorter [A] | 500 | 230V | Single-phase AC | 50Hz | 0.55kW | No | 20m | Free flow impeller | Shockproof plug type E | 26 kg | 39018542 | Loading... |
Benefits
- High operating reliability, even under tough operating conditions due to generously sized motor and thermal overload protection
- Long service life with shaft made of corrosion-resistant stainless steel and one or two bi-directional mechanical seals
- Trouble-free operation: clogging by coarse particles is prevented by large free passage (vortex impeller) or by cutter with high mechanical resistance for grey water
Certificates
Suitable for products to EN 12050-1Europe
-Europe
Technical Data
- Function
- Pump
- Connection type
- Flange
- Drive concept
- With electric actuator
- Max. flow rate
- 130 m3/h
- Min. flow rate
- 0.1 m3/h
- Max. head
- 37 m
- Min. head
- 0.1 m
- Mains frequency
- 50 Hz
- Mains voltage
- 230 V,
400 V - Casing material
- EN-GJL-250
- Nominal pressure
- PN 16
- Max. allowed working pressure
- 16 bar
- Suction behaviour
- Non-self-priming
- Maximum allowable fluid temperature
- 40 °C
- Minimum allowable fluid temperature
- 2 °C
