Vitachrom Dry-installed pump

Dry-installed pump Vitachrom

Service-friendly non-self-priming single-stage hygienic close-coupled pump in back pull-out design with magnetless KSB SuPremE motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 and PumpDrive variable speed system. The pump features a semi-open impeller and electropolished surfaces. It is very easy to clean by CIP/SIP thanks to its almost complete lack of dead volume or narrow clearances. Its wetted components are made of 1.4404/1.4409 (AISI 316L/CF3M) stainless steel. All materials comply with FDA standards and EN 1935/2004. ATEX-compliant version available.
See all documents and downloads

Main Applications

  • Food industry / beverage industry
  • Pharmaceutical industry
  • Chemical industry

Technical Data

Max. flow rate
340 m3/h
Max. head
100 m
Max. allowed working pressure
12 bar
Maximum allowable fluid temperature
110 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Tel: +27-11-876-5600


Your KSB contact : We’re here to support you

Benefits

  • Easy to clean with very little dead volume and excellent flushing capability
  • Service-friendly design, easy and fast to dismantle
  • Can be driven by all common standardised motors via stub shaft

Certificates

  • V00A_2268271627-2_3
    Elastomers certified to FDA, 3A, USP Class VI
    All countries
  • V00A_2268271627-1_3
    Certified quality management to ISO 9001
    All countries
  • V00A_2268271627-3_3
    Approved in accordance with the French drinking water regulation
    France

Technical Data

Function
Pump
Connection type
External-thread connection,
Flange
Drive concept
With electric actuator
Max. flow rate
340 m3/h
Min. flow rate
1 m3/h
Max. head
100 m
Min. head
1 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
400 V,
460 V
Nominal pressure
PN 12
Max. allowed working pressure
12 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
110 °C
Minimum allowable fluid temperature
-30 °C

Sectional Drawings