HERA-BD Gate valve

Gate valve HERA-BD

Knife gate valve to DIN/EN with wafer-type single-piece or two-piece body made of nodular cast iron, bi-directional, with gland packing, non-rising stem, corrosion-protected by epoxy coating.
See all documents and downloads

Main Applications

  • Waste water treatment plants
  • Biogas plants
  • Solids transport
  • Water treatment

Technical Data

Nominal pressure
PN 10
Max. nominal size
DN 1200
Maximum allowable fluid temperature
120 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Tel: +27-11-876-5600


Your KSB contact : We’re here to support you

Benefits

  • All cast iron and steel components are protected against corrosion by high-quality epoxy coating.
  • Robust and compact steel yoke for straightforward mounting of pneumatic and electric actuators and position switches. A hard anodised aluminium NAMUR adapter plate attached to the actuator allows sensors or solenoid valves to be quickly installed (plug & run).
  • Reliable and service-friendly stem seal: The gland packing is made of PTFE impregnated fibre and can be re-adjusted during operation. There is no need to remove the valve from the piping to replace the packing.

Technical Data

Function
Shut off/control flow
Connection type
Flange
Design concept Drive
With electric actuator,
With handwheel,
Lever,
With pneumatic actuator
Casing material
EN-GJS-400-15
Nominal pressure
PN 10
Max. nominal size
DN 1200
Min. nominal size
DN 50
Maximum allowable fluid temperature
120 °C
Minimum allowable fluid temperature
-10 °C

Sectional Drawings