Dry-installed pump Etaprime B

Horizontal self-priming volute casing pump, single-stage, with open multi-vane impeller, close-coupled; pump shaft and motor shaft rigidly connected; ATEX-compliant version available.

See all documents and downloads

Main Applications

Spray irrigation systems
Service water supply systems
Drainage
Drainage systems

Technical Data

Max. flow rate: 150 m3/h
Max. head: 100 m
Max. allowed working pressure: 10 bar
Maximum allowable fluid temperature: 90 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Benefits

Maintenance-free mechanical seal ensures operating reliability
Easy to dismantle due to back pull-out design; no need to remove the pump casing from the piping
Good suction performance, self-priming up to 9 m suction lift, also suitable for applications with relatively poor inlet conditions (i.e. low or negative inlet pressure) and for handling fluids with entrained gas.

Certificates

Certified quality management to ISO 9001
All countries

Technical Data

Function: Pump
Connection type: Flange
Drive concept: With electric actuator
Max. flow rate: 150 m3/h
Min. flow rate: 4 m3/h
Max. head: 100 m
Min. head: 3.5 m
Mains frequency: 50 Hz,
60 Hz
Mains voltage: 230 V,
400 V,
460 V
Casing material: EN-GJL-250/A48 CL 35B,
1.4408/A743CF8M
Nominal pressure: PN 10
Max. allowed working pressure: 10 bar
Suction behaviour: Self-priming
Maximum allowable fluid temperature: 90 °C
Minimum allowable fluid temperature: -30 °C

Sectional Drawings

Download