LCC-H Dry-installed pump

Dry-installed pump LCC-H

A high-efficiency slurry pump as an ideal solution for heavy-duty applications. The wetted pump end (casing, impeller and suction plate / liner) is made of white cast iron with a large chromium content. The walls of the wetted parts of the LCC-H version are thicker than those of the LCC-M. This increases wear resistance and enables the use in applications with higher pressures. The suction-side wear plate and the suction cover are two separate components, which significantly reduces maintenance costs. All pumps are designed for a maximum permissible working pressure of 16 bar. Perfectly suited for transporting fluids containing hardly to slightly abrasive solids. Ideal for sludges, classes 2 to 3.
See all documents and downloads

Main Applications

  • Sand and gravel
  • In-plant processes
  • Mineral processing
  • Secondary grinding

Technical Data

Max. flow rate
2990 m3/h
Max. head
73 m
Max. allowed working pressure
16 bar
Maximum allowable fluid temperature
120 °C

Your KSB contact: We're here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Tel: +39 039 6048-1


Your KSB contact : We’re here to support you

Technical Data

Function
Pump
Connection type
Flange
Drive concept
With electric actuator
Max. flow rate
2990 m3/h
Min. flow rate
85 m3/h
Max. head
73 m
Min. head
5 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
400 V,
480 V,
575 V,
690 V
Casing material
GASITE WD28G,
GASITE T90G,
GASITE 40G
Nominal pressure
PN 63
Max. allowed working pressure
16 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
120 °C
Minimum allowable fluid temperature
5 °C