INVCP Vertical shaft submersible pump

Vertical shaft submersible pump INVCP

Vertical immersion pump for wet or dry installation, available with closed or semi-open impeller. Supplied with discharge pipe extending above the baseplate (INVCP) or without discharge pipe (INVCN). ATEX-compliant version available.
See all documents and downloads

Technical Data

Max. flow rate
1600 m3/h
Max. head
100 m
Max. allowed working pressure
10 bar
Maximum allowable fluid temperature
100 °C

Your KSB contact: We're here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Tel: +39 039 6048-1


Your KSB contact : We’re here to support you

Benefits

  • Oversized bearings make for long-term reliability.
  • Different pump designs and materials for a wide range of applications, e. g. bearing lubricated with fluid supplied from the outside
  • Clogging is prevented; suction problems are prevented caused by hindered flow through strainers

Technical Data

Function
Pump
Connection type
Flange
Drive concept
With electric actuator
Max. flow rate
1600 m3/h
Min. flow rate
0.6 m3/h
Max. head
100 m
Min. head
2.2 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
230 V,
400 V,
460 V
Casing material
A351 GR CF8M,
EN-GJL-250/A48 CL 35B
Nominal pressure
PN 10
Max. allowed working pressure
10 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
100 °C
Minimum allowable fluid temperature
-10 °C