AmaPorter Submersible motor pump

Submersible motor pump AmaPorter

Vertical single-stage submersible motor pump (grey cast iron) for waste water in close-coupled design for wet installation, stationary or transportable version.
See all documents and downloads

Main Applications

  • Pumping station
  • Domestic waste water
  • Waste water transport
  • Draining of pits, shafts, etc.

Technical Data

Max. flow rate
130 m3/h
Max. head
37 m
Max. allowed working pressure
16 bar
Maximum allowable fluid temperature
40 °C

Material number list – AmaPorter

120 products
Material number
Price
AMA-PORTER S 545ND TRANSP.KSB AmaPorter [A]545Free flow impeller + cutter25 kg39017862
Loading...
AMA-PORTER SB 545NE TRANSP.KSB AmaPorter [A]545Free flow impeller + cutter26.5 kg39018471
Loading...
AMA-PORTER SB 545SE TRANSP.KSB AmaPorter [A]545Free flow impeller + cutter26.5 kg39018470
Loading...
AMA-PORTER 500ND-1 TRANSP. AUFST.KSB AmaPorter [A]500230VThree-phase current50Hz0.55kWNoFree flow impellerWithout0 kg39017525
Loading...
AMA-PORTER 500NE-1 TRANSP. AUFST.KSB AmaPorter [A]500230VSingle-phase AC50Hz0.55kWNoFree flow impellerShockproof plug type E0 kg39017199
Loading...

Benefits

  • High operating reliability, even under tough operating conditions due to generously sized motor and thermal overload protection
  • Long service life with shaft made of corrosion-resistant stainless steel and one or two bi-directional mechanical seals
  • Trouble-free operation: clogging by coarse particles is prevented by large free passage (vortex impeller) or by cutter with high mechanical resistance for grey water

Certificates

  • A10A_25835650827-1_2
    Suitable for products to EN 12050-1
    Europe
  • A10A_25835650827-2_2
    -
    Europe

Technical Data

Function
Pump
Connection type
Flange
Drive concept
With electric actuator
Max. flow rate
130 m3/h
Min. flow rate
0.1 m3/h
Max. head
37 m
Min. head
0.1 m
Mains frequency
50 Hz
Mains voltage
230 V,
400 V
Casing material
EN-GJL-250
Nominal pressure
PN 16
Max. allowed working pressure
16 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
40 °C
Minimum allowable fluid temperature
2 °C

Characteristic curves