DeltaMacro Pressure booster system

Pressure booster system DeltaMacro

Fully automatic package pressure booster system with two to four (F) / six (VC/SVP) vertical high-pressure pumps; available in cascade-controlled and two variable speed designs. Cascade control (F) for ensuring the required supply pressure. The VC and SVP versions ensure variable speed control of each pump by cabinet-mounted frequency inverter (VC) or motor-mounted PumpDrive variable speed system and KSB SuPremE motor (SVP), respectively, providing fully electronic control to ensure the required supply pressure. Automated with KSB BoosterCommand Pro Plus.
See all documents and downloads

Main Applications

  • Pressure boosting

Technical Data

Max. flow rate
960 m3/h
Max. head
155 m
Max. allowed working pressure
16 bar
Maximum allowable fluid temperature
60 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your KSB contact : We’re here to support you

Benefits

  • Suitable for drinking water installations as it has been manufactured under stringent hygienic conditions
  • Hygienic, optimised design without dead volumes
  • Ready to be installed, pre-set at the factory

Certificates

  • D12A_16673599755-2_3
    Approved in accordance with the UK drinking water regulation
    United Kingdom
  • D12A_16673599755-1_3
    Approved in accordance with the French drinking water regulation
    France
  • D12A_16673599755-3_3
    Approved in accordance with the German drinking water regulation
    Germany

Technical Data

Connection type
External-thread connection,
Flange
Drive concept
With electric actuator
Max. flow rate
960 m3/h
Min. flow rate
0.2 m3/h
Max. head
155 m
Min. head
0.1 m
Function Intg software Ctrl ut
Control
Mains frequency
50 Hz
Mains voltage
400 V
Casing material
X5CRNI18-10
Nominal pressure
PN 16
Max. allowed working pressure
16 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
60 °C
Minimum allowable fluid temperature
0 °C

Characteristic curves

Sectional Drawings