AmaPorter Submersible motor pump

Submersible motor pump AmaPorter

Vertical single-stage submersible motor pump (grey cast iron) for waste water in close-coupled design for wet installation, stationary or transportable version.
See all documents and downloads

Main Applications

  • Pumping station
  • Domestic waste water
  • Waste water transport
  • Draining of pits, shafts, etc.

Technical Data

Max. flow rate
130 m3/h
Max. head
37 m
Max. allowed working pressure
16 bar
Maximum allowable fluid temperature
40 °C

Material number list – AmaPorter

102 products
Material number
Price
AMA-PORTER 501ND-1 TRANSP.AGGREG.KSB AmaPorter [A]501400VThree-phase current50Hz0.75kWNoFree flow impellerWithout0 kg39017132
Loading...
AMA-PORTER 502ND-1 TRANSP.AGGREG.KSB AmaPorter [A]502400VThree-phase current50Hz1.1kWNoFree flow impellerWithout0 kg39017133
Loading...
AMA-PORTER 503ND-1 TRANSP.AGGREG.KSB AmaPorter [A]503400VThree-phase current50Hz1.5kWNoFree flow impellerWithout0 kg39017134
Loading...
AMA-PORTER 601 ND-1 TRANSP.AGGREG.KSB AmaPorter [A]601400VThree-phase current50Hz0.75kWNoFree flow impellerWithout0 kg39017135
Loading...
AMA-PORTER 602 ND-1 TRANSP.AGGREG.KSB AmaPorter [A]602400VThree-phase current50Hz1.1kWNoFree flow impellerWithout0 kg39017136
Loading...

Benefits

  • High operating reliability, even under tough operating conditions due to generously sized motor and thermal overload protection
  • Long service life with shaft made of corrosion-resistant stainless steel and one or two bi-directional mechanical seals
  • Trouble-free operation: clogging by coarse particles is prevented by large free passage (vortex impeller) or by cutter with high mechanical resistance for grey water

Certificates

  • A10A_25835650827-1_2
    Suitable for products to EN 12050-1
    Europe
  • A10A_25835650827-2_2
    -
    Europe

Technical Data

Function
Pump
Connection type
Flange
Drive concept
With electric actuator
Max. flow rate
130 m3/h
Min. flow rate
0.1 m3/h
Max. head
37 m
Min. head
0.1 m
Mains frequency
50 Hz
Mains voltage
230 V,
400 V
Casing material
EN-GJL-250
Nominal pressure
PN 16
Max. allowed working pressure
16 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
40 °C
Minimum allowable fluid temperature
2 °C

Characteristic curves

Inspection service

Inspection service

KSB’s inspection service provides regular pump inspection and pump maintenance to ensure the reliable operation and increased availability of your system.

  • Preventing failures
  • 24-hour on-call service
Installation and commissioning

Installation and Commissioning

Reliability right from the start: KSB service specialists are there to take care of your system with the installation of pumps, valves and automation components. Professional, reliable, on hand worldwide.

  • For a start-up as required
  • Also for non-KSB products
Pump repair

Pump Repair

KSB offers professional and fast service for pumps of any make and, if required, can modernise them to the latest technological standards. KSB also provides this service for explosion-proof pump sets.

  • For all makes
  • Pump set service