Movitec H(S)I Ring-section pump

Ring-section pump Movitec H(S)I

Multistage horizontal high-pressure centrifugal pump with KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors.
See all documents and downloads

Main Applications

  • Spray irrigation systems
  • General irrigation systems
  • Washing plants
  • Fire-fighting systems

Technical Data

Maximum flow rate TSG
26.3 m3/h
Maximum head TSG
195 m
Max allow ds work.pressure TSG
25 bar
Max allowed fluid temp TSG
140 °C

Ваш контакт KSB: ми вам допоможемо

Вам потрібна допомога у пошуку потрібного идент.номера? Незабаром ви отримаєте список, щоб мати можливість розмістити замовлення самостійно.
Тим часом, будь ласка, зв’яжіться з нашою службою підтримки:
Тел.: +38 044 496 25 39

Your KSB contact : We’re here to support you

Benefits

  • Reliable: product-lubricated plain bearings made of tungsten carbide, cast pump foot, torsion-resistant pump shroud and confined O-rings
  • Long service life: corrosion-resistant hydraulic components made of stainless steel
  • Easy to service: can be fitted with any standardised mechanical seal (to EN 12756)

Certificates

  • M06A_13688197643-1_2
    Approved in accordance with the French drinking water regulation
    France
  • M06A_13688197643-2_2
    Approved in accordance with the UK drinking water regulation
    United Kingdom

Technical Data

Component function
Pump
Connection type Inlet
External-thread connection
Drive concept
With electric actuator
Maximum flow rate TSG
26.3 m3/h
Minimum flow rate TSG
0.2 m3/h
Maximum head TSG
195 m
Minimum head TSG
0.1 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
230 V,
400 V,
460 V
Mtrl Hydraulic casing
X5CRNI18-10,
X2CRNIMO17-12-2
Nominal pressure Outlet
PN 25
Max allow ds work.pressure TSG
25 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
140 °C
Min allowed fluid temp TSG
-20 °C

Sectional Drawings