BOA-CVE C/CS/W/IMS/EKB/IMS EKB Globe valve

Globe valve BOA-CVE C/CS/W/IMS/EKB/IMS EKB

Control valve to DIN/EN based on standard type series BOA-Compact, BOA-SuperCompact, BOA-W, BOA-Compact EKB, BOA-Compact IMS EKB, BOA-Control IMS and BOA-Control IMS EKB, bonnetless pressure-retaining body, soft-seated. Leakage rate selectable from 0.05 % to drop-tight, Kvs values between 6.3 and 700 m³/h and closing pressures of up to 16 bar. With intelligent microprocessor-controlled and pre-set electric actuators providing actuating forces from 1000 N to 14,000 N; electronic configuration of flow characteristic, Kvs value, actuating signal and actuating time using PC tool or manual parameterisation unit. Customised configuration can be implemented at the KSB factory on request.
See all documents and downloads

Main Applications

  • BOA-CVE C / BOA-CVE CS / BOA-CVE W:
  • Hot-water heating systems
  • Air-conditioning systems
  • Heat recovery systems

Technical Data

Nominal pressure Hydr casing
PN 6, PN 10, PN 16
Maximum nominal size TSG
DN 200
Max allowed fluid temp TSG
120 °C

Ваш контакт KSB: ми вам допоможемо

Вам потрібна допомога у пошуку потрібного идент.номера? Незабаром ви отримаєте список, щоб мати можливість розмістити замовлення самостійно.
Тим часом, будь ласка, зв’яжіться з нашою службою підтримки:
Тел.: +38 044 496 25 39

Your KSB contact : We’re here to support you

Benefits

  • Individually programmable actuators programmed at the factory, for optimum adaptation to all applications
  • Maintenance-free design with stem sealed by EPDM profile ring
  • Soft-seated valve disc enables drop-tight shut-off.

Technical Data

Component function
Shut off/control flow
Connection type Inlet
Flange
Design concept Drive
With electric actuator
Mains frequency
50 Hz
Mains voltage
24 V,
230 V
Mtrl Hydraulic casing
EN-GJL-250,
EN-GJL-250- ELECTROSTATIC PLASTIC-COATING
Nominal pressure Hydr casing
PN 6,
PN 10,
PN 16
Maximum nominal size TSG
DN 200
Minimum nominal size TSG
DN 15
Max allowed fluid temp TSG
120 °C
Min allowed fluid temp TSG
-10 °C

Sectional Drawings