Main Applications
- Pumping station
- Domestic waste water
- Waste water transport
- Draining of pits, shafts, etc.
Technical Data
- Maximum flow rate TSG
- 130 m3/h
- Maximum head TSG
- 37 m
- Max allow ds work.pressure TSG
- 16 bar
- Max allowed fluid temp TSG
- 40 °C
Benefits
- High operating reliability, even under tough operating conditions due to generously sized motor and thermal overload protection
- Long service life with shaft made of corrosion-resistant stainless steel and one or two bi-directional mechanical seals
- Trouble-free operation: clogging by coarse particles is prevented by large free passage (vortex impeller) or by cutter with high mechanical resistance for grey water
Certificates
Suitable for products to EN 12050-1Europe
-Europe
Technical Data
- Component function
- Pump
- Connection type Inlet
- Flange
- Drive concept
- With electric actuator
- Maximum flow rate TSG
- 130 m3/h
- Minimum flow rate TSG
- 0.1 m3/h
- Maximum head TSG
- 37 m
- Minimum head TSG
- 0.1 m
- Mains frequency
- 50 Hz
- Mains voltage
- 230 V,
400 V - Mtrl Hydraulic casing
- EN-GJL-250
- Nominal pressure Outlet
- PN 16
- Max allow ds work.pressure TSG
- 16 bar
- Suction behaviour
- Non-self-priming
- Max allowed fluid temp TSG
- 40 °C
- Min allowed fluid temp TSG
- 2 °C