Vertical shaft submersible pump INVCP

Vertical immersion pump for wet or dry installation, available with closed or semi-open impeller. Supplied with discharge pipe extending above the baseplate (INVCP) or without discharge pipe (INVCN). ATEX-compliant version available.

See all documents and downloads

Technical Data

Max. flow rate: 1600 m3/h
Max. head: 100 m
Max. allowed working pressure: 10 bar
Maximum allowable fluid temperature: 100 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Tel. +47 96 900 900

shopmaster.norway@ksb.com

Your KSB contact : We’re here to support you

Benefits

Oversized bearings make for long-term reliability.
Different pump designs and materials for a wide range of applications, e. g. bearing lubricated with fluid supplied from the outside
Clogging is prevented; suction problems are prevented caused by hindered flow through strainers

Technical Data

Function: Pump
Connection type: Flange
Drive concept: With electric actuator
Max. flow rate: 1600 m3/h
Min. flow rate: 0.6 m3/h
Max. head: 100 m
Min. head: 2.2 m
Mains frequency: 50 Hz,
60 Hz
Mains voltage: 230 V,
400 V,
460 V
Casing material: A351 GR CF8M,
EN-GJL-250/A48 CL 35B
Nominal pressure: PN 10
Max. allowed working pressure: 10 bar
Suction behaviour: Non-self-priming
Maximum allowable fluid temperature: 100 °C
Minimum allowable fluid temperature: -10 °C