Linor RR ball valve with floating ball; Linor RB ball valve with trunnion mounted ball. Metal-seated, with full port, solid ball, with flanged ends to DIN EN 1092-1 PN 40/25/16/10. Designed and tested to ASME B16.34 and pressure-tested to ISO 5208 Rate D. Locking lever available as an option.

Globe valve to DIN/EN with butt weld or socket weld ends, gland packing, throttling plug, non-rotating stem, bayonet-type body/yoke connection, integrated position indicator, seat/disc interface made of Stellite.

Double-offset butterfly valve with ISO 5211 compliant square shaft end, with plastomer seat (also in fire-safe design), metal seat or elastomer seat (FKM [VITON R] or NBR [nitrile]). Lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of nodular cast iron, cast steel, stainless steel or duplex stainless steel (254 SMO). Wafer-type body (T1), full-lug body (T4), T4 suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME or JIS. Fire-safe design tested and certified to API 607. Fugitive emissions performance tested and certified to EN ISO 15848-1. ATEX-compliant version in accordance with Directive 2014/34/EU.

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator with integrated stem protection. All moving parts are separated from the fluid by the diaphragm. Maintenance-free.

Globe valve to DIN/EN with butt weld or socket weld ends, gland packing, throttling plug, non-rotating stem, bayonet-type body/yoke connection, integrated position indicator, seat/disc interface made of Stellite.

Ball valve with full port or reduced port, with threaded ends, welded ends or flanged ends. Available in various face-to-face lengths. Made of materials A105, A304, A316 or CF8M. On request with top flange to ISO 5211 for mounting actuators. Certified fire-safe to ATEX.

Gate valve to DIN/EN with flanged ends (AKD) or butt weld ends (AKDS), with bolted bonnet, body of forged or welded construction, non-rotating stem, split wedge with flexibly mounted discs for precise alignment with the body seats. Seat/disc interface made of wear and corrosion resistant 17 % chrome steel.

Knife gate valve with single-piece wafer-type body. Available in different versions depending on the application. Versions with rising stem and non-rising stem, with handwheel, bevel gear, chain wheel, pneumatic and electric actuators. Locking devices, neck extension and stem extensions optionally available. Certified fire-safe to ATEX.

Double-offset butterfly valve for perfect shut-off. Available in different materials with a range of valve disc and shaft seal designs to meet customer requirements.