AmaPorter Submersible motor pump

Submersible motor pump AmaPorter

Vertical single-stage submersible motor pump (grey cast iron) for waste water in close-coupled design for wet installation, stationary or transportable version.
See all documents and downloads

Main Applications

  • Pumping station
  • Domestic waste water
  • Waste water transport
  • Draining of pits, shafts, etc.

Technical Data

Max. flow rate
130 m3/h
Max. head
37 m
Max. allowed working pressure
16 bar
Maximum allowable fluid temperature
40 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact


egypt@ksb.com
Your KSB contact : We’re here to support you

Benefits

  • High operating reliability, even under tough operating conditions due to generously sized motor and thermal overload protection
  • Long service life with shaft made of corrosion-resistant stainless steel and one or two bi-directional mechanical seals
  • Trouble-free operation: clogging by coarse particles is prevented by large free passage (vortex impeller) or by cutter with high mechanical resistance for grey water

Certificates

  • A10A_25835650827-1_2
    Suitable for products to EN 12050-1
    Europe
  • A10A_25835650827-2_2
    -
    Europe

Technical Data

Function
Pump
Connection type
Flange
Drive concept
With electric actuator
Max. flow rate
130 m3/h
Min. flow rate
0.1 m3/h
Max. head
37 m
Min. head
0.1 m
Mains frequency
50 Hz
Mains voltage
230 V,
400 V
Casing material
EN-GJL-250
Nominal pressure
PN 16
Max. allowed working pressure
16 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
40 °C
Minimum allowable fluid temperature
2 °C

Characteristic curves

Download