Shopping Cart
4EYS Mechanical seal according to DIN EN 12756

Mechanical seal according to DIN EN 12756 4EYS

For the Etanorm SYT/Etabloc SYT/Etaline SYT pump type series. Single, unbalanced component seal, dynamic design. Solid primary rings designed to maintain an optimum lubricating film between the seal faces also at high pressures and temperatures. 4EYT variant in tandem arrangement also for use as a double mechanical seal.
See all documents and downloads

Main Applications

  • Heat transfer systems
  • Hot water circulation

Technical Data

Cartridge seal
No
Design
Dynamic
Balancing
Unbalanced mechanical seal
Sealing type
Single
Maximum allowable fluid temperature
140 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact
Your KSB contact : We’re here to support you

Benefits

  • In combination with the pump's design, the seal can be used for fluid temperatures of up to 350 °C. The complete Etanorm SYT application range can thus reliably be covered with this mechanical seal.
  • With the multi-spring arrangement the axial spring force is evenly distributed over the entire circumference of the primary ring. This minimises wear and contributes to a long seal life.
  • The solid primary ring is designed to maintain an optimum lubricating film between the seal faces also at high pressures and temperatures.

Technical Data

Maximum allowable axial movement
2 mm
Minimum allowable axial movement
-2 mm
Component type series
KSB Etanorm-SYT [B]
Cartridge seal
No
Maximum allowable dynamic pressure
16 bar
Design
Dynamic
Balancing
Unbalanced mechanical seal
Sealing type
Single
Mtrl metallic compon.mech.seal
X6CRNIMOTI17-12-2
Mtrl mech.seal spring
X6CRNIMOTI17-12-2
Mtrl Secondary seal inboard
ETHYLENE-PROPYLENE-DIENE-RUBBER,
V7 [FKM, HIGH FLUORINE CONTENT]
Mtrl Mating ring inboard
Q1 [SIC, DRUCKLOS GESINTERT],
Q7 [SIC,POROUS,SINTERED PRESSURELESS,NO GRAPHIT]
Mtrl Primary ring inboard
A [CARBON, METAL-IMPREGNATED],
B [CARBON, RESIN-IMPREGNATED],
Q1 [SIC, DRUCKLOS GESINTERT],
Q7 [SIC,POROUS,SINTERED PRESSURELESS,NO GRAPHIT]
Direction of rotation
Bi-directional
Maximum allowable sliding velocity
20 m/s
Spring design
Multiple springs
Maximum allowable static pressure
24 bar
Maximum allowable fluid temperature
140 °C
Minimum allowable fluid temperature
-15 °C

Sectional Drawings

Download
;