Sludge incineration solution
Efficiently utilising energy and resources from sludge: KSB solutions for thermal sludge utilisation
The transportation of sludge poses exceptional challenges for pumps, especially when it comes to ensuring safe and economical operation. Benefit from our extensive expertise and proven pumps and valves for this specific application.
Reliable processes thanks to KSB's sludge incineration solution for thermal utilisation at sludge incineration plants
Since the amended Sludge Ordinance in 2017, thermal utilisation has increasingly become the main disposal route for sludge from municipal waste water treatment plants. The advantage is that the heat generated during sludge incineration can be used for district heating and electricity generation.
However, transporting sludge through pipelines places high demands on pumps and valves. Choosing the wrong components can jeopardise process reliability and the overall efficiency of the plant.
As one of the leading manufacturers of pumps and valves for this application, KSB offers a sludge incineration solution that ensures operators can maintain trouble-free and cost-effective operations. Our technically advanced pumps play a crucial role, capable of safely managing aggressive, abrasive, highly viscous and solids-laden liquids in sludge incineration plants.
Engineering contractors and operators can rely on KSB's comprehensive product range for all primary and secondary processes, either tailored to meet specific needs or selected from our standard range. KSB is committed to ensuring prompt delivery from our global locations, supporting the seamless operation of sludge incineration facilities.
KSB solutions for sludge incineration power plants
Find reliable pumps for sludge incineration
KSB offers reliable pumps and valves for all primary and secondary processes in your sludge incineration plant.
HGM/HGM-S
Horizontal radially split product-lubricated multistage ring-section pump with radial impellers, axial and radial single-entry inlet.
HG
Horizontal radially split ring-section pump with radial impellers, single-entry or double-entry, multistage.
MegaCPK
Horizontal radially split volute casing pump in back pull-out design, with radial impeller, single-entry, single-stage, to DIN EN ISO 5199, dimensions to DIN EN ISO 2858, complemented by nominal diameters DN25 and ≥DN200, in large range of material and seal variants; also available as a variant with "wet" shaft and conical seal chamber. ATEX-compliant version available.
Multitec
Multistage horizontal or vertical centrifugal pump in ring-section design, long-coupled or close-coupled, with axial or radial suction nozzle, cast radial impellers and motor-mounted variable speed system. ATEX-compliant version available.
Omega
Single-stage axially split volute casing pump for horizontal or vertical installation, with double-entry radial impeller, mating flanges to DIN, EN or ASME.
RDLO
Single-stage axially split volute casing pump for horizontal or vertical installation, with double-entry radial impeller, mating flanges to DIN, EN or ASME.
Find reliable valves for sludge incineration
STAAL 40 AKD/AKDS
Gate valve to DIN/EN with flanged ends (AKD) or butt weld ends (AKDS), with bolted bonnet, body of forged or welded construction, non-rotating stem, split wedge with flexibly mounted discs for precise alignment with the body seats. Seat/disc interface made of wear and corrosion resistant 17 % chrome steel.
NORI 160 ZXLF/ZXSF
Globe valve to DIN/EN with flanged ends (ZXLF), butt weld ends or socket weld ends (ZXSF), with gland packing, with on/off disc or throttling plug, non-rotating stem, integrated position indicator, seat/disc interface made of wear and corrosion resistant 17 % chrome steel or Stellite.
BOA-H
Bellows-type globe valve to DIN/EN with flanged ends, with on/off disc or throttling plug, standard position indicator with colour coding for identification of valve design, replaceable valve disc; bellows protected when valve is in fully open position; seat/disc interface made of wear and corrosion resistant chrome steel or chrome nickel steel.
ISORIA 10/16
Centred-disc butterfly valve with ISO 5211 compliant square shaft end, sealed by elastomer liner, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Wafer-type body (T1), semi-lug body (T2), full-lug body (T4) or U-section body with flat faces (T5). Body types T2 and T4 are suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME, JIS.
