HPK-L Dry-installed pump

Dry-installed pump HPK-L

Horizontal radially split volute casing pump in back pull-out design to ISO 2858 / ISO 5199, single-stage, single-entry, with radial impeller. Equipped with heat barrier, seal chamber air-cooled by integrated fan impeller, no external cooling. ATEX-compliant version available.
모든 문서와 다운로드 보기

주 사용 용도

  • Pump for handling hot water and organic or synthetic heat transfer fluids in piping or tank systems.
  • Heating systems
  • Forced circulation boilers
  • District heating

기술 데이터

Maximum flow rate TSG
1400 m3/h
Maximum head TSG
233 m
Max allow ds work.pressure TSG
40 bar
Max allowed fluid temp TSG
400 °C

KSB 연락처: 항상 고객을 지원합니다.

올바른 제품 번호를 찾는 데 도움이 필요하십니까?
직접 주문이 가능하도록 빠른 시일 내에 컨텐츠를 제공할 예정입니다.
그동안 저희 지원팀에 문의해 주시기 바랍니다.

Your KSB contact : We’re here to support you

혜택

  • Low temperature in the mechanical seal chamber; no cooling water required thanks to air-cooled bearing bracket with heat barrier.
  • Increased operating reliability of versions for heat transfer applications by an optional two mechanical seals preventing leakage.
  • Higher efficiencies than the previous HPK-L model by continued development of the flow passage within the hydraulic system.

기술 데이터

Component function
Pump
Connection type Inlet
Flange
Drive concept
With electric actuator
Maximum flow rate TSG
1400 m3/h
Minimum flow rate TSG
1 m3/h
Maximum head TSG
233 m
Minimum head TSG
3.5 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
400 V,
460 V
Mtrl Hydraulic casing
GP240GH+N/A216 GRADE WCB,
G17CRMOV5-10
Nominal pressure Outlet
PN 40
Max allow ds work.pressure TSG
40 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
400 °C
Min allowed fluid temp TSG
-40 °C

단면도