Biomass power plant

Renewable Energy

KSB has the power to advance the future of energy production

Renewable energy is part of the global fight against climate change. In Germany, its share of electricity generation is set to increase to 65 percent by 2030. KSB is one of the driving forces behind this development.

Sustainable environmental protection requires reliable, long-lasting products

Reliability and a long service life play a particularly important role in products for the generation of renewable energy. This is because pumps and valves in this sector can be exposed to very aggressive environments. It is therefore important that systems deliver trouble-free operation at all times.


Harnessing renewable energy successfully – with products from KSB

For applications in the field of renewable energy, KSB offers particularly reliable and robust products capable of withstanding even the most adverse conditions such as salt water and salty sea air. This minimises maintenance, repair and life cycle costs. KSB pumps and valves thus make a valuable contribution to the optimum economic efficiency of your plant right from the outset.

KSB products can be used in almost all systems for the generation of renewable energy – from wind power plants and solar thermal power plants to systems for biogas production. They are employed in the primary and secondary processes of cooling water and seawater intake, fluid transport and boiler feed applications as well as in pressure booster, cleaning and fire-fighting systems.


Highly efficient technology – driving your success

Power plant pumps from KSB are equipped with optimised hydraulic systems and highly efficient drives enabling them to deliver first-class performance at all times. For example, they handle very hot heat transfer fluids in solar power plants, pump extremely saline seawater to cool wind power plants, and ensure the smooth operation of biomass power plants and biogas plants.


Our portfolio

KSB offers a wide range of products for the renewable energy sector

  • Standardised, close-coupled and in-line pumps
  • Pumps for desalination by reverse osmosis
  • Hot water pumps and circulators
  • Standardised chemical and process pumps
  • Submersible motor pumps and submersible pumps in discharge tubes
  • Submersible borehole pumps
  • Power plant pumps

Applications include

  • Solar thermal power plants
  • Wind energy systems (onshore and offshore)
  • Biomass power plants
  • Biogas plants
  • Geothermal plants
  • CO2 applications
  • Seawater desalination/reverse osmosis

Your benefits

  • Life cycle costs minimised due to low operating, maintenance and repair costs
  • High-performance and reliable components – optimised for operational reliability
  • Extensive product range for all renewable energy applications
  • Performance testing conducted under real operating conditions
  • Supervision of commissioning
  • Modernisation and optimisation of the system via appropriate retrofit measures
  • One contact for all phases of your project
  • Around-the-clock service from more than 170 service centres worldwide

Find suitable pumps for renewable energy applications

Whether for solar plants or wind power plants: KSB offers the right products for all types of renewable energy.

RPHb/RPHd/RPHbd

RPHb/RPHd/RPHbd

Heavy-duty horizontal radially split between-bearings volute casing pump to API 610, ISO 13709 (heavy duty), type BB2, with radial impellers, single- or double-entry, single- or two-stage design with centreline pump feet. ATEX-compliant version available.

HGM/HGM-S

HGM/HGM-S

Horizontal radially split product-lubricated multistage ring-section pump with radial impellers, axial and radial single-entry inlet.

CPKN

CPKN

Horizontal radially split volute casing pump in back pull-out design, with radial impeller, single-entry, single-stage, to ISO 2858 / ISO 5199. Also available as a variant with "wet" shaft, conical seal chamber and/or semi-open impeller. ATEX-compliant version available.

Omega

Omega

Single-stage axially split volute casing pump for horizontal or vertical installation, with double-entry radial impeller, mating flanges to DIN, EN or ASME.

Find suitable valves for renewable energy applications

NORI 40 ZXL/ZXS

NORI 40 ZXL/ZXS

Globe valve to DIN/EN with flanged ends (ZXL), butt weld ends or socket weld ends (ZXS), with gland packing, with on/off disc or throttling plug, rotating stem, seat/disc interface made of wear and corrosion resistant chrome steel or chrome nickel steel.

NORI 160 ZXL/ZXS

NORI 160 ZXL/ZXS

Globe valve to DIN/EN with flanged ends (ZXL), butt weld ends or socket weld ends (ZXS), with gland packing, with on/off disc or throttling plug, rotating stem, seat/disc interface made of wear and corrosion resistant 17 % chrome steel or Stellite.

STAAL 40 AKD/AKDS

STAAL 40 AKD/AKDS

Gate valve to DIN/EN with flanged ends (AKD) or butt weld ends (AKDS), with bolted bonnet, body of forged or welded construction, non-rotating stem, split wedge with flexibly mounted discs for precise alignment with the body seats. Seat/disc interface made of wear and corrosion resistant 17 % chrome steel.

KSB Newsletter

Don’t miss out the latest information on KSB pumps, valves and services and sign up today

  • Stay up to date with our E-Newsletter
  • Get valuable insights & exclusive promotions via E Mail
Newsletter
Illustration of the phases of a product life cycle: Consultation and analysis, commissioning, operation and repair

Service at KSB SupremeServ means being fully looked after

KSB SupremeServ offers you a comprehensive range of services and spare parts for pumps, valves and other equipment – including for products from other manufacturers – from face-to-face consultation to installation, commissioning, maintenance and repair. More than 3500 specialists in over 190 service centres worldwide are available around the clock, seven days a week. Concentrate on your core business – and let us take care of the rest.

Technical consultancy for pumps and valves

Technical Consultancy

As a full-range supplier, KSB is on hand to advise you in every stage of the life cycle of your product or system.

  • Cost savings via system optimisation
  • Increasing system availability
3D printing for pumps and valves

3D Printing

3D printing opens up new possibilities in spare parts procurement. An ideal solution if you need a spare part quickly.

  • Additive manufacturing of spare parts
  • Swift delivery